6: Audio Input - Roland XS-62S Reference Manual

Menu List

6: AUDIO INPUT

Menu item Value
(bold text: default value)
AUDIO IN 1–4
0–64dB
HEAD AMP GAIN
DIGITAL GAIN
-42.0–0 .0–42.0dB
PGM LEVEL -INF–10.0dB
-INF–10.0dB
PVW LEVEL
PGM MUTE OFF, ON
PVW MUTE OFF, ON
PAN LEFT–CENTER–RIGHT
HPF 75Hz OFF, ON
0 .0–500ms
DELAY
(0 .0–29.9/25.0frame)
GATE OFF, ON
-80.0– -50 .0–0.0dB
GATE THLD
GATE RELEASE
30–860–5000ms
COMP OFF, ON
COMP THLD -60.0– -30 .0–0.0dB
1.00:1, 1.12:1, 1.25:1, 1.40:1,
1.60:1, 1.80:1, 2.00:1, 2.50:1,
COMP RATIO
3.20:1, 4.00:1, 5 .60:1, 8.00:1,
16.0:1, INF:1
COMP ATTACK 0.2–1–100ms
COMP RELEASE
30–380–5000ms
ON
COMP AUTO G OFF,
COMP MAKE UP G -40–0 .0–40dB
EQUALIZER OFF, ON
EQ Hi
-15.0–0 .0–15.0dB
EQ Hi FREQ 1.00–10 .0–20.0kHz
EQ Mid -15.0–0 .0–15.0dB
EQ Mid FREQ 20.0Hz–500Hz–20.0kHz
EQ Mid Q
0.5–1 .0–16.0
EQ Lo -15.0–0 .0–15.0dB
EQ Lo FREQ 20.0–100–500Hz
OFF, ON
SOLO
This sets an effect preset (high-pass filter, gate, equalizer).
* When you change a preset, the settings of each effect are overwritten.
DEFAULT
MEETING
INTERVIEW
EFFECT PRESET
AMBIENT MIC
WINDY FIELD
DE-ESS & POPS SOFT
DE-ESS & POPS HARD
8
Explanation
This adjusts head amp gain. Head amp gain adjusts analog audio.
This adjusts digital gain. Digital gain adjusts digital audio internally converted from analog to
digital in the XS-62S.
This adjusts the level that is output to the PGM/1 bus.
This adjusts the level that is output to the PVW/2 bus.
This turns on/off the mute function for the PGM/1 bus. If this is "ON, " the audio of the PGM/1
bus is muted (silent).
This turns on/off the mute function for the PVW/2 bus. If this is "ON, " the audio of the PVW/2
bus is muted (silent).
This adjusts the sound position (pan).
This sets the high-pass filter on or off.
Effect This cuts off unneeded low-band audio. The cutoff frequency is 75 Hz.
This adjusts the delay time for input audio.
Effect This outputs audio with a delay.
This sets gate on or off.
Effect This mutes audio that is below a specified level.
This sets the level used as the threshold for removing audio. Audio below the level set here is
removed.
This adjusts the length of time until the audio is fully attenuated after audio falls below the
threshold.
This sets the compressor on or off.
Effect This compresses audio that exceeds a specified level.
This sets the level used as the threshold at which the compressor is applied. Compression is
applied to audio that exceeds the threshold.
This species the degree of compression applied to the audio.
If this is set to "1.00:1, " compression is not applied.
This sets the time until compression starts when audio exceeding the threshold is input.
This adjusts the length of time until compression ends after audio falls below the threshold.
This switches the auto makeup gain feature on and off.
When this is set to "ON, " the final output volume level after applying the compressor is
automatically adjusted according to the "COMP THLD" and "COMP RATIO" settings.
The total of the "COMP MAKE UP G" setting value described below and the value calculated by
auto makeup gain becomes the final output volume level (up to +34 dB).
This adjusts the final output volume level after applying the compressor.
This sets the equalizer on or off.
Effect Adjusts the sound quality for each frequency band.
This boosts or attenuates the high band.
This adjusts the center frequency when changing the tone quality in the high band.
This boosts or attenuates the middle band.
This adjusts the center frequency when changing the tone quality in the middle band.
This adjusts the width of the frequency band when boosting or attenuating the middle band.
This boosts or attenuates the low band.
This adjusts the center frequency when changing the tone quality in the low band.
This turns the solo function on/off. Only the input audio for which this is "ON" is monitored
through the headphones.
For line input (default setting)
For meetings
For interviews
For capturing ambient sound
For capturing ambient sound in a windy area
For reducing sibilants
For reducing plosives