List Of Commands - Roland XS-62S Reference Manual

List of Commands

* When sending a sequence of commands to the XS-62S from a controller, after each one, be sure to verify that an "ACK" response is returned before
sending the next command.
Video-related operations
Item
Select channel for PGM/1
Select channel for PVW/2
Select channel for AUX/3
Select transition effect
Set video transition time
Use a cut to transition video
Press the [TAKE] button
Set the [PinP] button on/off
Set SPLIT on/off
Set DSK on/off
Preview the DSK composited
result in the multi-view
monitor
Set the [AUTO MIXING]
button on/off
Set the [FREEZE] button on/
off
Verify the state of a video
output channel
Set the EDID
Input scaling type setting
Resolution setting for scaler
out
Verify the state of the scaler
out resolution
Scaling type of scaler out
setting
Select the color space for the
HDMI output
Set the signal type for the
HDMI output
When using PinP
compositing, adjust the
display position of the video
Sent Response
Parameter
command command
stxPGM:a; ACK a
stxPST:a; ACK a
stxAUX:a; ACK a
stxTRS:a; ACK a
stxTIM:a; ACK a
stxCUT; ACK
stxTAK; ACK
stxPPS:a; ACK a
stxSPS:a; ACK a
stxDSK:a; ACK
stxDVW:a; ACK
stxATM:a; ACK
stxFRZ:a; ACK
a
stxQVC:a,b;
stxQVC:a;
ACK
b
a
stxEDD:a,b; ACK
b
a
stxVIA:a,b; ACK
b
stxVOR:a; ACK a
stxQVR:a;
stxQVR; a
ACK
stxVOA:a; ACK a
a
stxVOC:a,b; ACK
b
a
stxVOD:a,b; ACK
b
a
stxPIP:a,b; ACK
b
0 (SDI IN 1), 1 (SDI IN 2), 2 (SDI IN 3), 3 (SDI IN 4), 4 (HDMI IN 5), 5 (HDMI/ANLG IN 6),
6 (STL/BKG IN 7), 7 (STL/BKG IN 8)
a: 0 (SDI IN 1), 1 (SDI IN 2), 2 (SDI IN 3), 3 (SDI IN 4), 4 (HDMI IN 5), 5 (HDMI/ANLG IN 6),
6 (STILL/BKG IN 7), 7 (STILL/BKG IN 8)
0 (SDI IN 1), 1 (SDI IN 2), 2 (SDI IN 3), 3 (SDI IN 4), 4 (HDMI IN 5), 5 (HDMI/ANLG IN 6),
6 (STILL/BKG IN 7), 7 (STILL/BKG IN 8)
0 (MIX), 1 (MIX), 2 (WIPE)
0 (0.0 sec)–40 (4.0 sec)
0 (OFF), 1 (PVW ON), 2 (PGM ON)
0 (OFF), 1 (PVW ON), 2 (PGM ON)
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
0 (OFF), 1 (ON)
0 (PGM/1), 1 (PVW/2), 2 (AUX/3)
0–7
0 (HDMI IN 5), 1 (HDMI IN 6), 2 (RGB IN 6)
0 (INTERNAL), 1 (SVGA), 2 (XGA), 3 (WXGA), 4 (FWXGA), 5 (SXGA), 6 (SXGA+),
7 (UXGA), 8 (WUXGA), 9 (720p), 10 (1080i), 11 (1080p)
* When a=2 (RGB IN 6), you can select 0–8.
0 (HDMI IN 5), 1 (HDMI IN 6), 2 (RGB IN 6)
0 (FULL), 1 (LETTERBOX), 2 (CROP), 3 (DOT BY DOT), 4 (MANUAL)
0 (480p, 576p), 1 (720p), 2 (1080p), 3 (SVGA), 4 (XGA), 5 (WXGA), 6 (SXGA), 7 (FWXGA),
8 (SXGA+), 9 (UXGA), 10 (WUXGA)
0 (480p, 576p), 1 (720p), 2 (1080p), 3 (SVGA), 4 (XGA), 5 (WXGA), 6 (SXGA), 7 (FWXGA),
8 (SXGA+), 9 (UXGA), 10 (WUXGA)
0 (FULL), 1 (LETTERBOX), 2 (CROP), 3 (DOT BY DOT), 4 (MANUAL)
0 (HDMI OUT 1), 1 (HDMI OUT 2), 2 (HDMI OUT 3)
0 (YCC), 1 (RGB LMT), 2 (RGB FULL)
0 (HDMI OUT 1), 1 (HDMI OUT 2), 2 (HDMI OUT 3)
0 (DVI-D), 1 (HDMI)
-450–450 (Horizontal position)
-400–400 (Vertical position)
LAN/RS-232 Command Reference
–
–
27