Mounting The Controller; Mounting And Connecting Wlc100 Wireless Lan Controllers - Juniper WLC Series Complete Hardware Manual

CHAPTER 6

Mounting the Controller

Mounting and Connecting WLC100 Wireless LAN Controllers

Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
Mounting and Connecting WLC100 Wireless LAN Controllers on page 27
Unpacking WLC100 Wireless LAN Controllers on page 28
Mounting WLC100 Wireless LAN Controllers on a Desk or Other Level Surface on page 29
Mounting WLC100 Wireless LAN Controllers on a Rack or Cabinet on page 30
Mounting WLC100 Wireless LAN Controllers on a Wall on page 33
The WLC100 controller chassis is a rigid sheet-metal structure that houses the hardware
components.
To mount and connect a WLC100 and to perform the initial configuration:
Unpack the controller by following instructions in
1.
Controllers" on page 28.
Mount the controller by following instructions appropriate for your site:
2.
"Mounting WLC100 Wireless LAN Controllers on a Desk or Other Level Surface" on
page 29 (using the rubber feet attached to the controller chassis)
"Mounting WLC100 Wireless LAN Controllers on a Rack or Cabinet" on page 30
(using the separately orderable rack-mount kit)
Mounting WLC100 Wireless LAN Controllers on a Wall on page 33
Follow instructions in "Connecting Power to WLC100 Wireless LAN Controllers" on
3.
page 37.
Perform initial configuration of the controller by following instructions in
4.
and Configuring WLC100 Wireless LAN Controllers (CLI Procedure)" on page 38
"Connecting and Configuring WLC100 Wireless LAN Controllers (WebView Procedure)"
on page 39.
Requirements for Mounting WLC100 Wireless LAN Controllers on a Desk or Wall on
page 21
Rack Requirements for WLC100 Wireless LAN Controllers on page 21
Cabinet Requirements for WLC100 Wireless LAN Controllers on page 22
"Unpacking WLC100 Wireless LAN
"Connecting
or
27