CHAPTER 4
Site Preparation
Site Preparation Checklist for WLC100 Wireless LAN Controllers
Table 8: Site Preparation Checklist
Item or Task
Environment
Verify that environmental
factors such as temperature
and humidity do not exceed
access point tolerances.
Power
Measure the distance between
the power source and the site
where you plan to mount the
controller.
Locate optimal sites for the
desired type of mounting.
Calculate the power
consumption and
requirements.
Hardware Configuration
Choose the number of access
points and WLC Series
controllers needed for your
planned Mobility System.
Copyright © 2013, Juniper Networks, Inc.
Site Preparation Checklist for WLC100 Wireless LAN Controllers on page 17
Environmental Requirements and Specifications for WLC100 Wireless LAN
Controllers on page 18
General Safety Guidelines for WLC100 Wireless LAN Controllers on page 19
The checklist in
Table 8 on page 17
preparing a site for mounting WLC100 controllers.
For More Information
"Environmental Requirements and Specifications for
WLC100 Wireless LAN Controllers" on page 18
WLC100 controllers require an installed Category 5
cable.
Planning Guidelines for Using RingMaster to Plan a
Mobility System
summarizes the tasks you need to perform for
Performed by
Date
17