Mounting Requirements; Requirements For Mounting Wlc100 Wireless Lan Controllers On A Desk Or; Wall; Rack Requirements For Wlc100 Wireless Lan Controllers - Juniper WLC Series Complete Hardware Manual

Wireless lan controller

Table of Contents

CHAPTER 5

Mounting Requirements

Requirements for Mounting WLC100 Wireless LAN Controllers on a Desk or Wall

Documentation

Wall on page 21

Rack Requirements for WLC100 Wireless LAN Controllers on page 21

Cabinet Requirements for WLC100 Wireless LAN Controllers on page 22

You can mount WLC100 controllers on a desk or wall. When choosing a location, allow

at least 6 in. (15.2 cm) of clearance between the front and back of the chassis and adjacent

equipment or walls.

Ensure that the wall on which the controller is mounted is stable and can support the

controller.

If you are mounting the controller in sheetrock (wall board with a gypsum plaster core)

or in wall board not backed by wall studs, use hollow wall anchors capable of supporting

the weight of the fully loaded chassis. Insert screws into wall studs wherever possible to

provide added support for the chassis.

Mounting WLC100 Wireless LAN Controllers on a Desk or Other Level Surface on

page 29

Mounting WLC100 Wireless LAN Controllers on a Wall on page 33

You can mount WLC100 controllers on two posts of a 19-in. two-post or four-post rack

or cabinet.

Table 10 on page 22

provides the rack requirements and specifications for WLC100

controllers.

Table of Contents

Show Quick Links

Table of Contents

Wlc100