Related
Documentation
Mounting WLC100 Wireless LAN Controllers on a Wall
Copyright © 2013, Juniper Networks, Inc.
Figure 5: Mounting the Wireless LAN Controller on Two Posts of a Rack
Have a second person secure the rack-mount tray to the rack by using the rack-mount
7.
screws. Tighten the screws.
Mounting WLC100 Wireless LAN Controllers on a Desk or Other Level Surface on
page 29
Mounting WLC100 Wireless LAN Controllers on a Wall on page 33
You can mount WLC100 controllers on a wall by using the wall-mounting slots on the
bottom of the chassis to fix to the screws on the wall.
Before mounting the controller on a wall:
Verify that the site meets the requirements described in
for WLC100 Wireless LAN Controllers" on page
Read
"General Safety Guidelines for WLC100 Wireless LAN Controllers" on page 19
and
"Requirements for Mounting WLC100 Wireless LAN Controllers on a Desk or Wall"
on page
21.
Ensure that rubber feet are attached to the bottom of the controller chassis.
Have one standard cable lock (optional and separately orderable) to secure the
controller from theft by connecting the cable to the slot for the security cable latch on
the controller.
Chapter 6: Mounting the Controller
"Site Preparation Checklist
17.
33