Juniper WLC Series Complete Hardware Manual page 26

Complete Hardware Guide for WLC100 Wireless LAN Controller
Table 8: Site Preparation Checklist (continued)
Item or Task
Type of Hardware Mounting
Decide the mounting location.
You can install controllers on a
desk, a level surface, in a rack
or cabinet, or on a wall. Ensure
that you provide sufficient
clearance around the mounting
location.
Order additional hardware kits,
bracket kits, security kits, or
tools for the planned hardware
mounting.
Schedule WLC100 controller
mounting by qualified
personnel.
Configure the Access Point
Configure the controller.
Related
Documentation
Environmental Requirements and Specifications for WLC100 Wireless LAN Controllers
18
For More Information
"Mounting WLC100 Wireless LAN Controllers on a
Rack or Cabinet" on page 30
"Mounting WLC100 Wireless LAN Controllers on a
Desk or Other Level Surface" on page 29
"Mounting WLC100 Wireless LAN Controllers on a
Wall" on page 33
http://www.juniper.net/techpubs/en_US/
See
release-independent/wireless/informationproducts/
pathway-pages/wireless-lan/index.html .
See Mobility System Software Configuration Guide at
http://www.juniper.net/techpubs/en_US/
release-independent/wireless/information-products/
pathway-pages/wireless-lan/software-80.html
.
General Safety Guidelines for WLC100 Wireless LAN Controllers on page 19
You must mount the WLC100 controller in a rack or cabinet housed in a dry, clean,
well-ventilated, and temperature-controlled environment.
Ensure that you follow these environmental guidelines:
The site must be as dust-free as possible, because dust can clog air intake vents and
filters, reducing the efficiency of the cooling system.
Maintain ambient airflow for normal operation. If the airflow is blocked or restricted,
or if the intake air is too warm, the controller might overheat, leading to the temperature
monitor shutting down the controller to protect the hardware components.
Table 9 on page 19 summarizes the required environmental conditions for normal
operation.
Performed by Date
Copyright © 2013, Juniper Networks, Inc.