Lift Cylinder - Husqvarna P524 Workshop Manual

5.6.12 Lift cylinder

Tools
Combination wrench
Circlip pliers
Torx
Dismantling
1. Lower the cutting deck.
2. Remove the cover over the frame tunnel.
3. Loosen the lifting chain by pressing the catch.
4. Remove the driver's seat. For further
instructions, refer to section "5.1.2 Driver's
seat" on page 18.
5. Loosen and plug the hydraulic couplings. For
further instructions, refer to section "5.6.1
Hydraulic hygiene" on page 52.
6. Dismantle the hydraulic couplings at both ends
of the lifting cylinder.
Dimension
19 mm
SGA
T30
7. Remove the lifting cylinder through the frame
Assembling
1. Assemble in the reverse order.
2. Bleed the lift cylinder by lowering and lifting the
3. Check for any leakage from the lift cylinder
4. Check the hydraulic tank level.
tunnel.
lift arms repeated times with the engine started.
hydraulic connections.
Hydraulic system
English – 73