Pto Button; Switch; Socket - Husqvarna P524 Workshop Manual

5.3.9 PTO button

Tools
Combination wrench
Torx
Dismantling
1. Remove the side cover.
2. Loosen the PTO button connection from the
circuit board.
3. Loosen the circuit board by dismantling the nut
and move the circuit board aside.
4. Dismantle the securing plate.
5. Put the connector up through the panel.
a
Assembling
Assemble in reverse order.
Dimension
10 mm
T30
5.3.10 12V switch
Tools
Torx
Dismantling
1. Remove the side cover.
2. Loosen the switch connection from the circuit
board.
3. Release the switch up through the panel.
Assembling
Assemble in reverse order.
5.3.11 12V socket
Tools
Torx
Dismantling
1. Remove the side cover.
2. Loosen the outlet connection from the circuit
board.
3. Dismantle the nut underneath the panel.
4. Release the outlet up through the panel.
Assembling
Assemble in reverse order.
Electrical system
Dimension
T30
Dimension
T30
English – 47