Solenoid Clutch - Husqvarna P524 Workshop Manual

5.2.3 Solenoid clutch

Dismantling
Tools
Wrench x2
Ratchet wrench
1. Dismantle the engine, see section "5.2.2
Engine" on page 30.
2. Counterhold underneath the magnetic clutch
with a wrench.
1
2
3
5
7
8
3. Loosen the screw (8) holding the belt pulley (2)
and torque disc (6) in place.
4. Remove the belt pulley (2).
5. Replace the magnetic clutch (4) together with
torque disc (6).
Dimension
16 mm
4
6
Assembling
1. Assemble in reverse order.
2. Place the belt pulley key in the groove on the
engine shaft.
3. Put the magnetic clutch on the engine shaft.
There is a key on the engine shaft that must be
located in the recess on the magnetic clutch.
4. Tighten the screw to 75 Nm.
Propulsion
English – 33