5.1.4 Wheel hub
Dismantling
Older versions of the wheel hub can occur.
Tools
Socket wrench
Allen Key
Torque wrench
Circlip pliers
1. Place a jack assembly under the machine as
illustrated.
2.
Raise the machine.
3.
Loosen the wheel bolts.
4.
Remove the wheel.
5.
Remove the SGH clip and washer in the middle
of the wheel hub.
6.
Remove the screws on the wheel hub.
7.
Dimension
19 mm
6 mm
8.
9.
Assembling
Assemble in reverse order.
Remove the SGA clip.
Dismantle the wheel hub.
Check that the key is free from damage.
Replace the key if it is damaged.
NB!
Tighten the wheel bolts alternately to torque
24 Nm.
Chassis
English – 21