Updating.firmware - Extron electronics CrossPoint 450 Plus Series User Manual

Updating firmware
The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher's control board without taking the switcher out of service.
Update the switcher firmware as follows:
1. Visit the Extron Web site, www.extron.com, click the Download tab, and then
click the Firmware link (figure 5-8).
Figure 5-8 — Location of firmware upgrade files
2. Select the appropriate firmware file to download and click Download.
3. Enter the requested personal information and then click Download to copy the
firmware to your computer.
4. Click Run twice (figure 5-9 on the next page). The PC downloads the
firmware update from the Extron Web site and starts the Extron Installation
Program to extract the firmware file.
5. Click Next. The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
N Note the folder to which the firmware file is saved.
6. Click Finish to exit the program.
CrossPoint 450 Plus and MAV Plus Switchers • Matrix Software
1
3
1
2
3
5-13