I/O.grouping - Extron electronics CrossPoint 450 Plus Series User Manual

7.
I/O grouping
I/O grouping is a matrix switcher feature that lets you subdivide the front panel
controls of the matrix into as many as four smaller functional sub-switchers
(figure 3-4) and limit tie creation. The I/O group limitation applies to tie creation
from the front panel only. Inputs and outputs can be assigned to one of four
groups or not assigned to any group.
1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
17 18 19 20 21 22 23 24 25 26 17 18 19 20 21 22 23 24 25 26 27 17 18 19 20 21 22 23 24 25 26 27
33 34 35 36 37 38 39 40 41 42 43 33 34 35 36 37 38 39 40 41 42 43 33 34 35 36 37 38 39 40 41 42 43
49 50 51 52 53 54 55 56 57 58 59 49 50 51 52 53 54 55 56 57 58 59 49 50 51 52 53 54 55 56 57 58 59
Group 1 Group 2
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11
17 18 19 20 21 22 23 24 25 26 27 17 18 19 20 21 22 23 24 25 26 27 17 18 19 20 21 22 23 24 25 26 27
33 34 35 36 37 38 39 40 41 42 43 33 34 35 36 37 38 39 40 41 42 43 33 34 35 36 37 38 39 40 41 42 43
49 50 51 52 53 54 55 56 57 58 59 49 50 51 52 53 54 55 56 57 58 59 49 50 51 52 53 54 55 56 57 58 59
4 input, 2 output
composite video matrix
Input
17 18 19 20
Camera #1
1
Output
2
Group 1
Camera #4
Figure 3-4 — I/O grouping of incompatible video formats
When you are creating ties on the front panel, inputs and outputs that are assigned
to a group can be tied only to other outputs and inputs within the same group.
For example, you cannot tie an input that is assigned to group 1 to an output that is
assigned to group 2. Ungrouped inputs and outputs can be switched to outputs and
inputs in any group. Ties between groups (for example, an input in group 1 tied to
an output in group 2) can be created under RS-232/RS-422 or Ethernet control.
Exit View-only mode: Press and release the View button to exit View-only
mode.
Press the View button
to exit View-Only mode.
All input buttons and output buttons
VIEW
return to unlit or background illumination.
The View button returns to
unlit or background
illumination.
27
Group 3
9 10 11
Document Camera
Monitor
VCR
Monitor
DVD
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Computer #1
3 input, 4 output
RGBHV matrix
Input
24 25 26
5
6
Output
Computer #3 7
8
Group 3
3 input, 2 output
INPUTS
FREEZE RGB UNIVERSAL COMPOSITE S-VIDEO SDI
S-video matrix
1 2 3 4 5
FREEZE
Input
21 22 23
3
Output
4
Group 2
VSC 700
SCAN CONVERTER
FREEZE
IR RESET MENU NEXT SIZE
MIN/MAX
CENTER/PAN/SIZE
VSC 700
Projector
Monitor
PICTURE ADJUSTMENTS ADJUST
CENTER SIZE BRT/CONT COL/TNT ZOOM DETAIL MENU
NEXT USP 405
UNIVERSAL SIGNAL PROCESSOR
USP 405
Monitor
3-23