HTML Operation, cont'd
Change the RGB delay (systems with CrossPoint 450 Plus sync BMEs)
The RGB delay interval defines how long the screen is blanked when switching to
a new input for the selected output. This value can be set from 00 to 5 seconds in
0.5-second increments.
Change the RGB delay as follows:
1.
Figure 6-17 — Output selection drop box
2.
3.
4.
Figure 6-18 — RGB delay drop box
5.
6-18
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Click the Output drop box. A drop-down scroll box appears (figure 6-17).
Click and drag the slider or click on the scroll up
button until the desired output is visible.
Click the desired output.
Click the RGB delay drop box. A drop-down scroll box appears (figure 6-18).
Click the desired RGB delay.
button or scroll down