Extron electronics CrossPoint 450 Plus Series User Manual page 101

Command/response table for SIS commands (continued)
Command
Save, recall, and directly write presets (continued)
Write room outputs
N • The maximum number of rooms (
• A room can contain a maximum of 16 outputs (
• An output can belong to only one room.
• If you try to save a room preset for a room that has not been created, the switcher responds with the error code E11.
• If no room name is assigned, the default name (
Example:
Read room outputs
Example:
Save current ties as a room
preset
Example:
Recall room preset
Directly write a room preset
Example:
X!
N = Input number
X@
= Output number
X1)
= Room # (for room presets)
X1!
= Name
X1@
= Room preset #
CrossPoint 450 Plus and MAV Plus Switchers • Programmer's Guide
ASCII command Response
(host to switcher) (switcher to host)
EX1) , X@ , X@ X@ }
,
... MR
1 2 n
Mpr
X1)
) is 10.
X@
s).
X1!
) is "Room #
E }
, , , ,
8 3 04 5 6MR Mpr8
EX1) }
X1!
MR
E }
3MR Class 1,01,02,08,09
X1) X1@ ,
Rmm
*
3*9,
Rmm03•Spr09
X1) X1@ .
Rmm
*
E X1) X1@ X! X@ X! X@
+ * P * ! * %
Rmm
+7*3P12*7&13*35$4*26%6*6!
Esc
Rmm07•Spr03
01 – (maximum number of inputs for your model)
01 – (maximum number of outputs for your model)
01 – 10 (Each can have up to 10 presets (
12 alphanumeric characters maximum
01 – 10
Additional
description
See notes below.
X1) X@ , X@ X@ ]
,
, ...
1 2 n
X1) X@ X@ X@
• 1 ,• 2 ,• 3 ".
]
, , , , Outputs 3, 4, 5, and 6 are
03 04 05 06
assigned to room 8.
X@ , X@ X@ ]
,
, 1 2 ...
n
]
Outputs 1, 2, 8, and 9 are
assigned to room 3, which
named "Class 1".
X1) X1@]
Command character is a
•Spr
comma.
]
Save current ties as preset 9
for room 3.
X1) X1@]
Command character is a
•Rpr
period.
X! X@ X! X@ }
Enter as many ties as are
* $ ... * !
valid for this configuration.
X1) X1@]
•Spr
The ! tie, & tie, and % tie
commands are all valid and
equivalent.
Brackets are shown to
separate ties for clarity only.
]
Create preset 3 for room 7,
which ties audio input 12 to
output 7, video input 13 to
output 35, RGBHV input 4
to output 26, and video and
audio input 6 to output 6.
X1@
s) assigned.)
4-13