One-Shot/Loop Setting; Normal/Reverse Setting - Yamaha SU200 Owner's Manual

One-shot/Loop Setting

Use this setting to select whether the sample plays one time only, or continuously as a loop.
One-shot ................... The sample plays out once only, from its start point to its end point (see page 30).
Loop........................... The sample loops.
Make the setting using the [ONE SHOT/LOOP] button. First press the pad you want to set. Then (while the
sample is still playing, or after it has finished) press the [ONE SHOT/LOOP] button as necessary so that
ONESHOT or LOOP appears on the display.

Normal/Reverse Setting

This setting selects whether the sample plays out in its normal direction (from start to end) or in
reverse direction (from end to start).
Normal....................... The sample plays out in its normal direction.
Reverse..................... The sample plays out backwards.
Make the setting using the [NORMAL/REVERSE] button. First press the pad you want to set. Then (while
the sample is still playing, or after it has finished) press the [NORMAL/REVERSE] button as necessary so
that NORMAL or REVERSE appears on the display.
• If you simultaneously play samples that that were recorded at different grades, samples that
NOTE
are set to REVERSE will not play out at the correct pitch. You can avoid the problem by
recording samples at the same grade.
If a start point and end point are set (see page 30), playback moves from the start point to the
end point and then loops back to the start point.
ONE SHOT
LOOP
GRADE
NORMAL
REVERSE
Chapter 2 Playing the Pads
29