Loading Data From A Memory Card - Yamaha SU200 Owner's Manual

Loading Data from a Memory Card

The SU200 offers three methods for loading sample data from a memory card.
Volume Load: Load an entire saved volume (an entire set of saved samples and settings) from the card.
Wave Import: Load wave data (a WAV file) into a selected pad on the SU200.
Sample Load: Load a selected sample from a saved volume into a selected pad on the SU200.
Z
Insert the appropriate memory card into the card slot.
X
Switch off all pads, and then press the [JOB] button to enter Job mode.
• You can escape from Job mode by pressing the [JOB] button once again.
NOTE
C
Press the [LOAD] button (pad 6) to enter Load mode.
SAVE
V
If necessary, press [-1/NO] or [+1/YES] or turn knob 1 to select the load type.
Volume
Load
Wav
Impt
Sample
Load
44
Chapter 6 Using Memory Cards
LOAD D E L E T E
C A R D
LOAD
C A R D
–1/NO + 1/YES
BPM
or
DATA REC TRGLVL
EFFECT
1 2
CONTROL
LOAD
–1/NO + 1/YES
C A R D
BPM
or
DATA REC TRGLVL
EFFECT
1 2
CONTROL
LOAD
C A R D
Volume
Load
Vol 01
Load
Volume number (file number)
D E L E T E
on memory card
Cymbal
Load
Name of the WAV file saved on the
D E L E T E
card (first six letters only). [In this
example, the filename is "Cym-
bal.wav".]
Vol 01
Load
D E L E T E
Volume number (file number) on
memory card.
Go to Step 5,
then to Step 8.
Go to Step 5,
then to Step 6.
Go to Step 5,
then to Step 6.