Resampling - Yamaha SU200 Owner's Manual

Resampling

Z
Switch off all pads, and then press the [RESMPL] button to enter Resampling mode.
• You can escape from Resampling mode by pressing the [EXIT] button.
NOTE
X
Press the pad into which you want to record your new sample. (See page 20.)
If you wish to change the bank, press the appropriate bank button before selecting the pad.
When resampling, the SU200 always records in MONO (monaural) mode using STD (standard) grade.
• If a sample is already recorded on the pad you select, the display asks whether to delete it (as
NOTE
in "Delete C-1?"). Press [+1/YES] to delete the existing sample, or [-1/NO] to cancel and
retain the existing sample.
• You can resample playback from samples recorded at STD (standard), LONG, and EXLG
(extra long) grades.
• Avoid resampling of HI grade samples, as the results will not play back correctly.
C
Press the [START/STOP] button to enter resampling standby.
26
Chapter 1 Recording Samples
RESMPL
START
STOP
Which
Pad?
Wait
ing 00_19_6
Remaining available recording time