Yamaha SU200 Owner's Manual page 37

SLICE
This effect cuts the sample into rhythmical pattern of discrete, intermittent slices.
• Type.................... Turn knob 1 to change the slice pattern.
• Gate Time.......... Turn knob 2 to change the slice hold time.
TECH MOD
This effect applies a distinctive modulation and a metallic tonality.
• LFO .................... The low frequency oscillator that generates the modulation. Turn knob 1 to control the LFO
modulation effect.
• MOD SPEED .... Turn knob 2 to change the modulation speed.
DIST/LO-FI
This effect adds edge distortion and produces a more lo-fi sound.
• LO-FI.................. Turn knob 1 to vary the lo-fi (quality degradation) characteristics.
• DRIVE................ Turn knob 2 to change the amount of distortion.
DELAY
This effect adds a delay.
• DELAY LEVEL.. Turn knob 1 to control the sound level of the delayed sound component.
• TIME................... Turn knob 2 to control the delay time: the time between the start of the original playback and
the start of the delayed playback. The delay time changes in accordance with the sample's
tempo (BPM).
FILTER
The filter removes a specific frequency range from the sample output, producing a change in the sound quality.
• CUTOFF ............ Turn knob 2 to make the sound brighter or darker.
• RESONANCE... Turn knob 1 to apply distinctive resonance characteristics to the sound. Turning the knob
heightens the overtones, resulting in a twanging sound similar to that produced by an analog
synthesizer.
SCRATCH
This feature lets you use the ribbon controller to scratch out a selected sample. Rub the ribbon up or down to play the
sample forward or in reverse, emulating the scratch sound produced by manually turning a vinyl disc.
TIME (real-time tempo change)
This feature changes the playback tempo in real time while introducing a distortion effect.
z
Hold down the pad you want to
work on, and press the [TIME]
button.
TIME
• The SU200 can play a maximum of 6 standard (or lower) grade monaural samples at one
NOTE
time, or up to 2 high-grade samples at one time. The maximum number may decline, how-
ever, when using the scratch or TIME feature.
• Loop Remix, Slice, TIME, and scratch do not work on audio input.
• Loop Remix and Slice may generate noise when used with certain types of sound.
• Loop Remix and Slice have no effect on pads that are set to one-shot play.
• If you use Loop Remix on a sample for which loop-track play is off, you may notice a slight
change in the sample's tempo.
x
Tap on the [TAP] button or turn knob 1 to change the
tempo.
TIME
Tap 3 or 4 times at the desired
tempo.
* To cancel TIME operation, press the [TIME] button again
DATA REC TRGLVL
or
EFFECT
2
1
CONTROL
Chapter 4 Effects
37