Yamaha SU200 Owner's Manual page 53

Buffer
Full!
MIDI
Err!
No
Card!
No
File!
Card
Full!
Write
Err!
Bad
Card!
Format
Err!
Bad
File!
Empty
Pad!
Same
Pad!
Illgal
Grade
The SU200's receive buffer became full during reception of
MIDI data (the SU200 was not able to keep up with the
incoming data load). To correct the problem, reduce the
quantity of data you are transmitting to the SU200.
An error occurred during reception of MIDI data. Check the
cable connections and the MIDI settings at the SU200 and at
the sending side.
You attempted to execute a card-related operation while no
memory card was present in the slot.
You attempted to execute a file-related memory card opera-
tion (load from card, or delete from card), but the file you
specified does not exist on the card.
You attempted to save data into a memory card, but the card
is already full. If you wish to save new data to the card, you
must first free up space by deleting one or more files from
the card.
The SU200 was unable to write data to the memory card.
This error occurs when you attempt to format or save to a
memory card that is write-protected or damaged.
The memory card is damaged.
The SU200 does not support the memory card's format. (The
card was formatted by another device and cannot be read by
the SU200.)
The file on the memory card is corrupted or is unsupported.
You attempted to execute an operation that requires an exist-
ing sample (deletion, extraction, etc.), but the pad you
selected is currently empty.
If attempting to use time-stretch: You selected the same pad
as both master and slave.
If attempting to copy a sample:
as both the source and the destination.
You attempted to use a pad containing a high-grade sample
when carrying out a function (such as resampling) that does
not support high-grade samples.
You selected the same pad
53
Reference