Time Stretch (Changing A Sample's Length) - Yamaha SU200 Owner's Manual

Time Stretch (Changing a Sample's Length)

Use this feature to rebuild a sample so that its tempo (BPM) matches the tempo of another sample.
Below, the term slave pad refers to the pad containing the sample you want to rebuild, while master
pad refers to the pad holding the sample whose tempo you are matching.
CAUTION
• This operation permanently changes the sample in the slave pad. Before proceeding, you may
want to back up this sample by copying into another pad (see page 50).
Z
Switch off all pads, and then press the [JOB] button.
• You can escape from Job mode by pressing the [JOB] button once again.
NOTE
X
Press the [TIME STRETCH] button.
SCALE TIME STRETCH
C
Select the slave pad (the pad containing the sample you want to rebuild).
BANK
• You can press the [EXIT] button to return to the slave-pad selection display.
NOTE
V
Select the master pad (the pad containing the sample whose tempo you want to use).
BANK
B
Press [+1/YES] to rebuild the slave pad's sample so that its tempo matches the
tempo (BPM) of the master pad's sample. The SU200 rebuilds the sample and then
exits from Job mode.
COPY PAD VOL
PAD
BANK BANK
BANK BANK
JOB
Which
Pad?
Master
Pad?
Strtch
Sure?
Chapter 7 Other Useful Features
A-4
A-4 C-2
49