Yamaha SU200 Owner's Manual page 43

C
Press the [SAVE] button (pad 5) to enter Save mode.
SAVE
• You can press the [EXIT] button to return to Job mode (to Step 2).
NOTE
V
If necessary, press the [SAVE] button again to change the save type.
Select either Volume Save or Wav Expt (Wave Export).
Volume
Save
Wav
Expt
B
Use [-1/NO], [+1/YES] , or knob 1 to select the following.
If you selected Volume Save:
Select the file number for the save file. (All SU200 samples and their related settings will be saved into this file.)
If you selected WaveExpt:
Select the sample you wish to save (A1 to C8). Then press the [SAVE] button (pad 5). Then use [-1/NO], [+1/YES],
or knob 1 once again to select the number to be used as the name for the saved WAV file.
N
Press the [SAVE] button (pad 5) to execute the save.
SAVE
CAUTION
• Do not remove the memory card or switch off the power while saving is in progress.
LOAD D E L E T E
C A R D
–1/NO + 1/YES
BPM
or
DATA REC TRGLVL
EFFECT
1 2
CONTROL
or
+
–1/NO 1/YES
BPM
LOAD D E L E T E
C A R D
Volume
Save
Vol 04
Save
SAVE LOAD
C A R D
Which
Pad?
SAVE LOAD
C A R D
DATA REC TRGLVL
EFFECT
2
1
CONTROL
The SU200 saves the data into the card, and then
exits from Job mode.
Chapter 6 Using Memory Cards
File number for save file
43