Advertisement
En
SETTING UP
A
TE
LETT
The PF1500 has a second set of speakers located on the underside of the
keyboard.
Before playing, attach the stand, referring to the separate Assembly
Instructions sheet.
When the keyboard has been placed on the stand, continue with
the following procedure for playing.
1.
Plug the AC power cord into an AC outlet.
2.
Though the PF1500 has its own internal amplifier/speaker
system, you can also play it through an external sound
system via the LINE OUT
(I,II) sockets.
The piano's
output is normally mono, but when the reverb is used, a
stereo signal is output. The SPEAKER switch on the back
panel may be used to turn the internal speakers on and off.
3.
For headphone listening, connect a pair of headphones to
the PHONES
socket.
When headphones are inserted, the
internal speakers are automatically turned off.
4.
Tocontrol the piano from an external MIDI device, connect
the MIDI OUT of the MIDI device to the MIDI IN of the
piano. To control an external MIDI device from the piano,
connect the MIDI IN of the MIDI device to the MIDI OUT
of the piano. (Refer to the MIDI OPERATION section for
further details.)
5.
The LINE IN sockets can be used for connecting a tape
recorder, synthesizer, drum machine, etc, which can be
listened to through the piano's own internal amplifier and
speakers while you play. The OUTPUT connectors of the
external source should be connected to the LINE IN sockets
on the piano. The level should be adjusted at the external
source.
NOTE:
Never feed speaker-level signals to the piano's LINE IN
sockets - it could cause damage to the piano's internal cir-
cuitry.
Set the music stand in position by pushing it about 5cm (2")
away from the keyboard, and then lifting it back. The exact
position may then be adjusted forwards or backwards.
BASIC OPERATION
POWER
VOLUME
Turn on the power switch. If the piano is to be connected to other
amplification or MIDI instruments, do not turn on the power
until all connections have been made.
VOICE SELECT
MINTED
EOL a DE MAX
UD
VOLUME
Adjust the volume using the Volume slider on the front panel
(pushing it to the right increases the volume, and pushing it to the
left decreases the volume).
Select the desired voice by pressing a voice select button on the
front panel.
There are five voices: PIANO
1, PIANO
2, E
PIANO, HARPSICHORD and VIBE.
When a voice has been
selected, the corresponding LED above the select switch will
light.
Advertisement
