Changed Range For The Rollback Time Setting; Changed Range For The Fade Time Setting; Lit/Dark Status Of The [Undo]/[Redo] Keys; Shortcut For Saving The Current Song - Yamaha AW4416 Supplement Manual

Changed range for the Rollback Time setting

The range of the rollback time setting in the UTILITY screen Prefer.2 page (the
distance of the rewind that occurs when you press the [ROLL BACK] key) has
been changed to 0–30 seconds. (In version 1.0 it was 0–5 seconds.)
Refer to: Rollback Time

Changed range for the Fade Time setting

The range of the Fade Time that you specify in the SCENE screen Fade Time page
(the time over which the faders of each channel reach their new positions when
you recall a scene) has been changed to 0.0 seconds – 25.0 seconds. (In version
1.0 it was 0.0–10.0 seconds.)
Refer to: Fade Time

Lit/dark status of the [UNDO]/[REDO] keys

The [UNDO]/[REDO] keys will now be lit or dark to indicate whether undo or
redo is currently available. If the [UNDO] or [REDO] key is lit, undo or redo can
be executed. If they are dark, the corresponding operation cannot be executed.
Refer to: [UNDO]/[REDO] keys

Shortcut for saving the current song

Now you can hold down the [SHIFT] key and press the [SONG] key to directly
access the SONG screen Song List page. If this method is used to access the Song
List page, the cursor will automatically be at the SAVE button, providing a short-
cut for saving the current song.
Refer to: Saving a song (Song List page)
Use the TRACK [CUE] key to monitor the stereo
track
When using the TRACK [CUE] key to directly output the signal of the desired
track from the MONITOR OUT jacks, the output from the MONITOR OUT jacks
will now be stereo only if the stereo track is selected. (Tracks 1–16 will be output
in monaural, just as in version 1.0.)
Refer to: TRACK [CUE]
Additions and changes in version 1.2, 1.3
Reference Guide p.35
Reference Guide p.126
Operation Guide p.40
Reference Guide p.1
Operation Guide p.40, 104
17