3.3.2 Changing the Starting Word Number
When you want to change the starting word number following mount registration, please take
the following procedure.
Allocation method
Changing the starting word number following mount registration should be performed in the
following procedure. In the following procedure, it is assumed that an I/O map is already
displayed.
PROCEDURE
1. On the "I/O Map", double click a unit for which the starting word number
should be changed.
2. Enter a desired starting word number and press the [OK] button.
The changed number is registered in the I/O map.
KEY POINTS
Once you change the starting word number using FPWIN GR7, the I/O map
•
is changed from the initial status following mount registration. It is
necessary to edit the I/O map online, or to download the project once again.
Pressing the "Reallocate" button with a desired slot selected displays the
•
word No. reallocation dialog box.
3.3 Mount Allocation Using FPWIN GR7
3-11