Wiring For Power Supply Units - Panasonic FP7 Series User Manual

4.2.2 Wiring for Power Supply Units

 Terminal layout for power supply units
 Power supply voltage
Confirm that the connected voltage is within the allowable range of the power supply.
Model
number
AFP7PSA1 100 to 240 V AC
AFP7PSA2 100 to 240 V AC
 Power supply cable
Use a power supply wire of 2mm
 Suitable wires and tightening torque
Terminal
Power supply terminal and ground
terminal
Alarm output terminal
 Suitable crimp terminal
M3 terminal screws are used for the terminal. Use the following solderless terminals for wiring
to the terminals.
Fork type terminals
 Suitable crimp terminal
Manufacturer
J.S.T. Mfg Co.,Ltd
Rated input Allowable voltage
voltage
85 to 264 V AC
85 to 264 V AC
(AWG14) to minimize the voltage drop.
2
AWG14 (2.0 mm
AWG22 to 14 (0.3 mm
Round type terminal
Shape Part no.
Round type 2-MS3
Fork type 2-N3A
Round type 1.25-MS3
Fork type 1.25-B3A
Rated output
range capacity
24 W
43 W
Suitable wires
)
2
to 2.0 mm )
2 2
1.04 to 2.63 mm
0.25 to 1.65 mm
4.2 Wiring the Power Supply
Rated output
current
1 A
1.8 A
Tightening torque
0.5 to 0.6 N∙m
Suitable wires
2
2
4-9