1.3.2 Restrictions on Combinations of Units
Combinations of base block
• Install the expansion master unit AFP7EXPM on the left-hand side of the CPU unit.
• Install the power supply unit on the left-hand side of the expansion master unit AFP7EXPM
as necessary.
(1)
Power supply
(1)
unit
Combinations of expansion block
• Install the expansion slave unit AFP7EXPS on the left-hand side of the CPU unit.
• Install the power supply unit on the left-hand side of the expansion master unit AFP7EXPM if
used.
(1)
Power supply
(1)
unit
Base block and expansion block common restrictions
• Make sure to connect the end unit to the right side of the terminal unit.
• As a power supply for driving the system, you can either connect the power supply unit used
at 100 V/230 V AC, or directly supply 24 V DC power to the CPU unit and expansion slave
units. For the restrictions on combinations, refer to "1.4 Selection of Power Supply and
Restrictions on Combination".
(2)
(3)
Expansion
(2)
(3)
master unit
(2)
Expansion
(2)
slave unit
1.3 Restrictions on Using Expansion Unit
CPU unit
(4)
(4)
(4)
Unit
(5)
(4)
Unit
(5)
End unit
(5)
End unit
(5)
1-9