Attaching Units - Panasonic FP7 Series User Manual

Installation and Wiring

4.1.2 Attaching Units

• Attach unit attachment connectors on the side of each unit.
• Make sure to connect an end unit to the right of the end unit.
• After attaching units, attach the assembly to the DIN rail.
(Note) When the CPU unit is CPS21, a power supply unit cannot be attached.
 Unit attaching procedure
1.
Release the fixing hook on the side of
the unit.
When attaching a power supply unit,
remove the connector cap.
2. Attach unit connectors on the side of
each unit.
4-4