Panasonic FP7 Series User Manual page 31

(4) GT power supply terminal
For our programmable display "GT series", either 5V DC output or 24V DC output can be
used.
(5) Power supply connector
Connected with an external power supply (24V DC); When a power supply unit is used, do not
connect this.
(6) DIN hook
Used for fixation on the DIN rail.
(7) LAN port (CPS4E、CPS41E、CPS41ES、CPS3E、CPS31E、CPS31ES)
Port for connection to Ethernet LAN
(8) USB port
Connected to a PC using the tool software
(9) Unit connectors
Connected to the internal circuit of I/O units and intelligent units
(10) Dip switches (CPS4E､CPS41E､CPS41ES)
Do not change the setting. The switches are all set to OFF at the factory.
(11) Card cover
11-1
11-2
(Note)
Number Name
11-1 Battery holder
11-2 SD memory card slot
11-3 Card operation switch
11-4 Power supply connector
11-4
11-3
Attach a battery.
Insert an SD memory card.
Select between ROM operation or SD operation. By selecting SD
operation, provisional operation from the SD memory card becomes
possible.
Connected to a power supply connector
2.1 CPU Unit (CPS4*/CPS3*)
Functions
2-3