Message Waiting - AT&T SYSTEM 25 User Manual

Message Waiting

Most voice terminals have a light that indicates a waiting
message. There may be an associated
you can press to turn off the light after you receive messages. If
your voice terminal does not have a
use a feature access code to turn the light off.
If you have a
[ COVER MSG ]
waiting lights on voice terminals for which you provide
Individual Coverage.
Turning on the Message Light at a Voice Terminal
Turning Off the Message Light at a Voice Terminal
button, you can control the message
Lift the handset and listen for dial tone.
Dial
Dial the PDC of the voice terminal.
Listen for confirmation tone and then
hang up.
NOTE: If you hear fast busy tone instead of
confirmation tone, either the voice terminal
doesn't have a message waiting light or the
PDC you dialed is invalid.
Lift the handset and listen for dial tone.
Dial
Dial the PDC of the voice terminal.
Listen for confirmation tone and then
hang up,
(Continued)
button, which
MESSAGE
MESSAGE
button, you must
49