Placing Calls - AT&T SYSTEM 25 User Manual

Placing Calls

You can place calls to people inside your company
button, and you can place calls to
[ SYSTEM ACCESS ]
outside your company with the following buttons:
[ FACILITY ]
[ PERS LINE ]
[ SYSTEM ACCESS ]
The light next to a
trunks (lines) in this group are busy. If the light is on, you can
activate a busy-to-idle reminder. This reminder lets you know
when you can make your call.
NOTE: If you want to activate a busy-to-idle reminder,
remain on-hook and press the
Placing an Inside Call Using the DTAC
1 Lift the handset and listen for dial tone.
2 Dial the PDC.
Placing an Outside Call Using SYSTEM ACCESS
1 Lift the handset and listen for dial tone.
2 Dial the outside line access code and listen
3 Dial the telephone number.
[ FACILITY ] button indicates when all of the
for dial tone.
(Continued)
with a
people
button.
[ FACILITY ]
21