Advanced Fax Setting Options - Xerox WC PE120 Series User Manual

5

Advanced Fax Setting Options

Option
Send Forward
RCV Forward
Toll Save
Junk Fax Setup
You can exit from Setup mode at any time by pressing
Stop/Clear.
You can set the machine to send a copy of all outgoing faxes
to a specified destination, in addition to the fax numbers you
entered.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the number of
the fax machine to which faxes are to be sent.
You can set your machine to forward incoming faxes to
another fax number during a specified time period. When a fax
arrives at your machine, it is stored in memory. Then, the
machine dials the fax number that you have specified and
sends the fax.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the fax number
to which faxes are forwarded. Then, you can enter the starting
time and date, and/or the ending time and date. The Local
Copy option allows you to set the machine to print the fax on
your machine, if fax forwarding is completed without any
error.
You can set your machine to store your faxes in memory and
send them at a specified toll-saving time. For details about Toll
Save mode, see page 2.25.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the starting time
and date, and/or the ending time and date for Toll Save mode.
Using the Junk Fax Barrier feature, the system will not accept
faxes sent from remote stations whose numbers are stored in
the memory as junk fax numbers. This feature is useful for
blocking any unwanted faxes.
Select Off to turn the feature off. Your machine accepts all
faxes.
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers using the Set option. After
storing numbers, your machine will not accept faxes from the
registered stations. To delete all junk fax numbers, use the All
Delete option.
Description
7
Faxing 7.39