Available Fax Setup Options - Xerox WC PE120 Series User Manual

Available Fax Setup Options

Option
You can select the default fax receiving mode.
• In Tel mode, you can receive a fax by
picking up the handset of the extension
phone and then pressing the remote receive
code (see page 7.4). Alternatively, you can
press Manual Dial (you can hear a fax tone
from the remote machine) and then press
Start on the control panel of your machine.
• In the Fax mode, the machine answers an
incoming call and immediately goes into
fax reception mode.
Receive Mode
• In Ans/Fax mode, the answering machine
answers an incoming call, and the caller can
leave a message on the answering machine.
If the fax machine senses a fax tone on the
line, the call automatically switches to Fax
mode.
• In DRPD mode, you can receive a call using
the Distinctive Ring Pattern Detection
(DRPD) feature. This option is available only
when you set up the DRPD Mode. For further
details, see page 7.17.
You can specify the number of times the
Ring To
machine rings, from 1 to 7, before answering
Answer
an incoming call.
You can select the default contrast mode to fax
your documents lighter or darker.
• Lighten works well with dark print.
Lighten/
• Normal works well with standard typed or
Darken
printed documents.
• Darken works well with light print or faint
pencil markings.
Your machine can automatically redial a remote
Redial Term fax machine if it was busy. Intervals from 1 to
15 minutes can be entered.
You can specify the number of redial attempts,
Redials from 0 to 13. If you enter 0, the machine will
not redial.
Description
Faxing
7
7.3