Power Failure Report - Xerox WC PE120 Series User Manual

Received Fax Report
This report shows information on the faxes you have recently
received.
System Data List
This list shows the status of the user-selectable copy or fax
options. You may print this list to confirm your changes after
changing any settings.
Scheduled Job Information
This list shows the document(s) currently stored for Delayed
faxes or Toll Save faxes. The list shows the starting time(s) and
type(s) of operation(s).
Message Confirmation
This report shows the fax number, the number of pages, the
elapsed time of the job, the communication mode, and the
7
communication results for a particular fax job.
You can set up your machine to automatically print a message
confirmation report after each fax job. See page 7.4.
Junk Fax Number List
This list shows up to 10 fax numbers specified as junk fax
numbers. To add or delete numbers to or from this list, access
the Junk Fax Setup menu: see page 7.39. When the Junk Fax
Barrier feature is turned on, incoming faxes from those numbers
are blocked.
This feature recognize the last 6 digits of the fax number set as
a remote fax machine's ID.
Multi-communication Report
This report is printed automatically after sending documents
from more than one location.

Power Failure Report

This report is printed out automatically when power is restored
after a power failure, if any data loss occurs due to the power
failure.
N
: The lists you have set to print out automatically don't print
OTE
out when there is no paper loaded or a paper jam has occurred.
Faxing 7.37