Advanced Fax Setting Options - Xerox WorkCentre PE16 User Manual

Advanced Fax Setting Options

Option
Send Forward
RCV Forward
Toll Save
Junk Fax Setup
Secure Receive
5.6
A F
DDITIONAL
You can set the machine to always forward all of the
outgoing faxes to the specified destination besides the fax
numbers you entered.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the number
of the remote fax machine to which faxes are forwarded.
You can set your machine to forward incoming faxes to
another fax number during a specified time period. When
a fax arrives at your machine, it is stored in the memory.
Then, the machine dials the fax number that you have
specified and sends the fax.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the fax
number to which faxes are forwarded. Then, you can enter
the start time and/or the end time. The Print Local Copy
option allows you to set the machine to print the fax, if fax
forwarding is completed with no error.
You can set your machine to store your faxes into the
memory and send them at the spedified toll-saving time.
For details about sending toll save faxes, see page 1.10.
Select Off to turn this feature off.
Select On to turn this feature on. You can set the start
time and/or the end time for toll save mode.
Using the Junk Fax Barrier feature, the system will not
accept faxes sent from remote stations of which their
numbers are stored in the memory as junk fax numbers.
This feature is useful for blocking any unwanted fax.
Select Off to turn the feature off. Anybody can send you a
fax.
Select On to turn the feature on. You can set up to 10 fax
numbers as junk fax numbers. After storing numbers, you
do not receive any faxes from the registered stations.
You can keep your received faxes from being accessed by
unauthorised people.
For further details about setting this mode, see page 5.2.
EATURES
Description