Selecting The Paper Tray; Adjusting The Document Resolution - Xerox WC PE120 Series User Manual

Selecting the Paper Tray

After loading the print material for fax output, you have to select
the paper tray you will use for the fax job.
1
Press Menu on the control panel.
The first available menu item, "Paper Setting," appears on
the top line of the display.
2
Press the scroll button (
the bottom line of the display.
3
Press Enter.
4
Press the scroll button (
want appears on the display.
You can select Tray1, Tray2, Tray1/2, or Auto. If you do not
install the optional Tray 2, the Tray2 and Tray1/2 menu
item will not appear on the display.
5
Press Enter to save the selection.
6
To return to Standby mode, press Stop/Clear.

Adjusting the Document Resolution

The default document settings produce good results when using
typical text-based documents.
However, if you send documents that are of a poor quality, or
contain photographs, you can adjust the resolution to produce a
higher quality fax.
1
Press Resolution on the control panel.
or ) until "Fax Tray" appears on
or ) until the paper tray you
7
Faxing 7.9