Table of Contents
Advertisement
10.6
Using USB Flash Drive
Managing the USB Flash Drive
Changing the Default Settings
When you scan a document to the USB flash drive, the default
scan options, including scan size and scan format, can be set to
the most frequently used modes. These settings are only
available when you scan to the USB flash drive.
1
Make sure that the USB flash drive is inserted into the USB
port in the front of the machine. If necessary, insert the
USB flash drive. See page 10.2.
2
Press Scan-to... on the control panel.
The first available menu, item "USB Memory," appears on
the bottom line of the display.
3
Press Enter. The display shows the available memory space
for about 2 seconds and the first available menu item,
"Auto Scan," appears on the bottom line of the display.
4
Press the scroll button (
on the bottom line of the display.
5
Press Enter.
The first available menu item, "Scan Size," appears on the
bottom line.
6
Press Enter.
7
Press the scroll button (
image to be scanned.
8
Press Enter to make your selection.
9
Press the
button to scroll to "Scan File Type" and press
Enter to access the menu.
10
Press the scroll button (
which the document is to be scanned. You can select BMP,
TIFF, PDF, or JPEG.
11
Press Enter.
or
) until "Scan Setup" appears
or
) and select the size of the
or
) and select the file format in
Advertisement
Table of Contents
Troubleshooting
