Xerox WC PE120 Series User Manual page 53

You can set the length of time for which the scan lamp waits
after a scan job is completed before it switches to the power
save mode.
1
Press Menu until "Machine Setup" appears on top line of
the display.
2
Press the scroll button (
appears on the bottom line. Press Enter.
3
Press the scroll button (
want appears on the bottom line.
The available time options are 0.5, 1, 4, 8, and 12 (hours).
4
Press Enter to save the selection.
5
To return to Standby mode, press Stop/Clear.
or ) until "Scan PWR Save"
or ) until the time setting you
Getting Started
2
2.27