Evaporative Cooler Operation; Introduction; How Does Your Evaporative Cooling Work; Before Operating Your Evaporative Cooler - Rinnai Brivis Contour Series Operation Manual

Evaporative air coolers

Hide thumbs

Table Of Contents

Table of Contents

INTRODUCTION

Congratulations on your purchase of a Brivis Cooling system. For you to achieve the performance and efficiency

expected from your new cooler, please ensure the installer is a qualified trades person, that the installer has

commissioned the unit before you commence operating, and you take the time to read the contents of this manual.

In some Australian States it is mandatory that your cooler installation is issued with a certificate of compliance

to guarantee the installation workmanship� Please check with your installer or the local plumbing authority or

association� The Brivis cooler is covered by the product warranty as outlined in this manual�

HOW DOES YOUR EVAPORATIVE COOLING WORK?

The amount of cooling available from any type of cooling system is dependent on the outside weather conditions�

Your evaporative cooler works best on hot, dry days. It is essential to provide the required amount of ventilation (for

your evaporative cooling system to function properly) by opening windows/doors whenever the cooler is operating�

Air is drawn in through the filter pads resulting in 100% fresh cool air entering the home. The movement of this

cooled air through your home will draw the heat out of the house, so be sure that doors or windows are open to

expel this heat to outside.

Whenever possible start the cooler early to prevent the build up of heat within the house, and on sultry or humid

days your cooler may work better with the fan ONLY running and the pump turned OFF. Stale air, cigarette smoke

and fumes can be quickly cleared and replaced with fresh air by turning the fan to manual mode�

BEFORE OPERATING YOUR EVAPORATIVE COOLER

Make sure enough window and/or door area is open for the unit to work correctly� The following table gives a guide

to the amount of open area required for each model in m

Brivis Models

Promina

Advance

Contour

Series

L36

P36

P46

L46

P56

L56

P66

L66

P76

L76

Average ventilation

Door = 1.6m²

area

provided

various

openings

when fully opened�

You can also choose to have these openings only halfway open. However, the opening will only

provide half the amount of ventilation shown and additional ventilation openings would be required.

NOTE

Brivis