Basic Operation; Off; Cooling; Heating - Rinnai J Series Operation Manual

BASIC OPERATION

BASIC OPERATION BUTTONS
The external buttons are for basic operations, the buttons located behind the door are for advanced operations.
ON
When the appliance is off (standby):
1. Press the "ON/OFF" button to turn on appliance. The appliance will begin to
operate.
All current operational settings, modes and the battery status are shown on
the LCD screen.
When the appliance is turned on via the "ON/OFF" button it will return to operation using the last
operational settings and modes that were set.
NOTE

OFF

When the appliance is running:
1. Press the "ON/OFF" button to turn off appliance. The appliance will be placed
into standby.
The previous operation mode and the remote control battery status are shown
on the LCD screen.
When the appliance is turned off via the "ON/OFF" button it will retain the last operational settings
and modes that were in use and be placed into standby.
NOTE

COOLING

When selected this mode operates the air conditioner as a cooling appliance.
1. Press the "COOL" button.
2. Press or
range is 16°C ~ 32°C in 0.5°C increments).
The fan speed defaults to that which was last used (see FAN SPEED below).

HEATING

When selected this mode operates the air conditioner as a heating appliance.
1. Press the "Heat" button.
2. Press or
range is 16°C ~ 32°C in 0.5°C increments)).
The fan speed defaults to that which was last used (see FAN SPEED below).
Refer to "Operation Range Limitations" on page 5 for the operational temperature range of the
appliance when using for both cooling and heating.
NOTE

FAN SPEED

The fan speed can be adjusted manually or set to automatic.
1. Press the "FAN" button until the desired fan speed is shown on the LCD
screen (displayed below the temperature display), the available fan speeds
are AUTO / low (2 bars) / medium (4 bars) / high (6 bars).
Select "AUTO" if you wish the fan speed to be adjusted automatically by the
appliance.
Rinnai
to set the desired temperature (the available temperature
to set the desired temperature (the available temperature
8
RUN
C
COOL
SPEED
SWING LRSWING
POWERCON
iFEEL
H
ON OFF
COOL
SWING LRSWING
POWERCON
iFEEL
H
ON OFF
RUN
C
COOL
AUTO
SPEED
SWING LRSWING
POWERCON
iFEEL
H
ON OFF
RUN
C
HEAT
AUTO
SPEED
SWING LRSWING
POWERCON
iFEEL
H
ON OFF
RUN RUN
C C
AUTO
SPEED SPEED
Low
Medium
High
Auto
Split AC OM