Locking The Brivis Networker; Setting The Pin; To Lock The Brivis Networker; To Unlock The Brivis Networker - Rinnai Brivis Contour Series Operation Manual

NETWORKER WALL CONTROL OPERATION

LOCKING THE BRIVIS NETWORKER

To prevent any unwanted alterations being made to the coolers settings, the Brivis Networker can be locked via a
4- digit PIN code. In the case of dual Brivis Networkers, if one is locked the other is also locked.
If dual Brivis Networkers are installed, the user PIN codes can only be set at the Master Brivis
Networker. The Slave Brivis Networker can only lock and unlock the system and cannot access
the PIN codes.
NOTE

Setting the PIN

1� Press the FUNCTION button (2), followed immediately by Key 2 (15).
The screen will then display "Enter Your PIN number to lock the system"�
DO NOT ENTER NUMBERS AT THIS STAGE AND CONTINUE TO THE NEXT STEP.
2� Push the MODE button (3)�
The screen will now display "User PIN reset – Enter master PIN"�
DO NOT ENTER NUMBERS AT THIS STAGE AND CONTINUE TO THE NEXT STEP.
3� Push the MODE button (3)�
The screen will now display the message "User PIN number 1 alteration - Enter current PIN"�
•
If this is the first time for setting the PIN, the current PIN will be "1111".
•
If the PIN has been previously altered then enter your current PIN�
The screen will then display the message, "Enter the new PIN"�
4� Enter your new 4-digit PIN number using a combination of Keys 1 to 5 (14 to 18).
The screen will now display, "Repeat the entry of the new PIN"�
Providing that you re-enter the new PIN correctly, the screen will now display "Valid PIN – PIN altered"�
5� If an incorrect number is entered press the AUTO key (6) to clear all digits, then re-enter your user PIN.
6� To exit this area at any time, just push the ON/OFF key (1).

To Lock the Brivis Networker

1� Press the FUNCTION button (2), followed immediately by Key 2 (15).
The screen will then display "Enter Your PIN number to lock the system"�
2� Enter your current user PIN to lock the Brivis Networker�
The screen will now display "System locked out!"
3� If an incorrect number is entered press the AUTO key (6) to clear all digits, then re-enter your user PIN.
If an invalid PIN is entered, the message "Invalid PIN entered - Try again" will scroll across
the screen. The user has three attempts at entering a valid PIN. On the third failed attempt the
message "Invalid PIN entered!" will be displayed. At this point the Brivis Networker will abort the
NOTE
PIN entry screen, and return to its original state. You will then need to repeat the process.
A flashing Padlock icon (12) indicates that the Brivis Networker is locked.

To Unlock the Brivis Networker

1� Press the FUNCTION button (2), followed immediately by Key 2 (15).
The screen will then display "Enter Your PIN number to unlock the system"�
2� Enter your current user PIN to lock the Brivis Networker�
The screen will now display "System unlocked!"
3� If an incorrect number is entered press the AUTO key (6) to clear all digits, then re-enter your user PIN.
If an invalid PIN is entered, the message "Invalid PIN entered - Try again" will scroll across
the screen. The user has three attempts at entering a valid PIN. On the third failed attempt the
message "Invalid PIN entered!" will be displayed. At this point the Brivis Networker will abort the
NOTE
PIN entry screen, and return to its original state. You will then need to repeat the process.
Brivis 14 Evap AC OM