Table of Contents
Advertisement
CLEARANCES
ROOF MOUNTED EVAPORATIVE COOLER POSITIONING
The cooler must be installed in a position that allows for optimal performance and adequate and safe access for
service, as per installation guidelines and any applicable regulations.
Extra service charges may apply for the cost of any equipment or additional labour involved in accessing
the cooler if these guidelines are not met.
These extra charges apply to both product warranty claims, general repairs and service maintenance calls.
REQUIRED CLEARANCES
Low Profile Units (Slopping Base)
1m on three (3) sides (front and two sides)
Traditional Units (Flat Base)
1m on all four (4) sides
MANDATORY INSPECTION PRIOR TO INSTALLATION
Immediately report any damage or discrepancies to the Supplier of the appliance� This appliance was inspected
and tested at the time of manufacture and packaging, and released for transportation without known damage.
Upon receipt, inspect the exterior for evidence of rough handling in shipment. Ensure that the appliance is labelled
correctly for the gas and electrical supply, and/or other services it is intended to be connected to.
For safety and warranty purposes, appliances that may be damaged or incorrect must not be installed or operated
under any circumstances� Installation of damaged or incorrect appliances may contravene local government
regulations� Rinnai disclaims any liability or responsibility whatsoever in relation to the installation or operation of
damaged or incorrect appliances�
Brivis
6
Evap AC OM
Hide quick links:
Advertisement
Table of Contents
