Automatic Pre-Wet; Automatic Operation - Rinnai Brivis Contour Series Operation Manual

NETWORKER WALL CONTROL OPERATION

AUTOMATIC PRE-WET

When the Cooler is turned ON, with both the fan and the pump in either Auto or Manual mode, the Cooler will
start a Pre-Wet automatically� The Pre-Wet stage ensures the pads are thoroughly wet before the fan starts� This
prevents warm air being initially blown into your home and contributes to the effective operation and performance
of the Cooler. The Pre-Wet time will vary depending on how long the Cooler has been OFF, and whether it needs
to fill the tank prior to operation. During the Pre-Wet the message "Pre-Wetting cooler pads - Please Wait!" will
scroll across the top of the display�

AUTOMATIC OPERATION

In Auto mode the Brivis Networker automatically turns the pump ON or OFF as required and varies the fan speed
to maintain your selected "comfort level."
11
13
To run the unit in Auto mode, just follow these easy steps:
1� Turn the Brivis Networker on using the ON/OFF button (1)�
2� Press the Auto button (6) until "Auto" appears on the screen.
3� Rotate the Rotary dial (7) to set the comfort level you desire (up to have a cooler comfort level and down to
have a warmer comfort level) the set comfort level (11) is displayed on the LCD screen (13)�
It will take approximately 8 minutes for the Cooler to complete the pre-wet before the fan will
turn on. The next time you return to "Auto" these steps will not be necessary because the Brivis
Networker remembers your previous settings.
NOTE
Benefits of using Brivis coolers in Auto mode in preference to Manual mode
•
Power and water consumption varies in relation to the chosen comfort level� This comfort level cannot be as
easily maintained in Manual mode�
•
In Auto Mode the unit operates only when it is required�
•
Enables a set comfort level to be maintained automatically as the outside / inside temperature conditions
change�
•
It allows you to pre-set the cooler to turn ON early and not let the house build up heat�
•
The outlet airflow noise is kept to a minimum, as the fan speed is only as fast as required to maintain the set
comfort level. This slower speed also results in more efficient saturation of the Cooler filter pads, and a cooler
outlet air temperature�
Brivis 10
1
6
7
Evap AC OM