Table of Contents
Advertisement
Syn248 Installation and Configuration Guide
Gateway Placement
You can place the Gateway on a tabletop, mount it into a standard 19-inch metal rack,
or wall mount it. The Gateway must be installed within three feet of the building ground
point. Install each device using the following instructions.
Rack Mounting
To mount the Gateway into a standard 19-inch rack:
1. Remove the two mounting brackets and six screws from the packing tissue.
2. Position a bracket at the front of the device.
3. To align the screw holes, place the bracket on the device so that the locating indent
on the bracket matches the indent on the device.
4. Insert each of the three screws into the holes provided and tighten securely. Repeat
the process for the other bracket.
5. Position the chassis into the rack.
Installation
Locating Indent
15
Back to Contents
Advertisement
Table of Contents
Troubleshooting
