Door Hinge Levers; Heat Pump - Bosch SHP65TL5UC Repair Instructions

5.11

Door hinge levers

Tools needed: T20 Torx & #2 Phillips screwdrivers and pliers.
1. Remove inner door – section 5.11.
2. Remove right hinge ground wire.
3. Pry open hinge bushing latches and lift hinge levers from
hinge plates. Hinge bushings should be replaced after
latches have been pried open.
702_58300000170749_ara_en_c This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
5.12

Heat pump

The heat pump is best accessed from the bottom of the
dishwasher by flipping it on it's back.
access the water switch and the sump.
6
2
1
Tools needed: T20 Torx, #2 Phillips & small flat blade
screwdrivers and pliers.
1. Flip dishwasher for bottom access – section 5.1.6.1.
Use the same process to
3
4
5
1. Sump
2. Drain pump
3. Heat pump
4. Clamp
5. Adapter
6. Seal ring
7. Water switch
7
Page 54 of 82