Bosch SHP65TL5UC Repair Instructions page 42

2. Disconnect dishwasher mounting brackets (below left).
3. Turn off water and disconnect water line at the water
supply (below right).
4. Turn off electricity and disconnect electric supply by
unplugging power cord from the customer outlet (below
left).
5. Disconnect drain line at the customer connection (below
right).
6. Slide dishwasher out completely (below left) and carefully
pull out water supply hose, drain hose and power cord
(below right).
702_58300000170749_ara_en_c This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
5.1.6 Flipping dishwashers
Follow these instructions to flip dishwashers upside-down or on
their backs for bottom access. Bases must be removed.
5.1.6.1 To flip dishwasher for bottom access
Tools needed: T20 Torx, # 2 Phillips and flat blade screwdrivers.
1. Disconnect & pull out dishwasher – section 5.1.5.1.
2. Remove base cover – section 5.1.4.3.
3. Remove base insulation (on models with insulation).
4. Remove all water from dishwasher sump and hoses.
5. Slide dishwasher out completely (below left).
6. Remove both racks (below right).
7. Remove water inlet control – section 5.8.
8. Remove the two (2) rear base screws (below).
Page 42 of 82