Water Switch - Bosch SHP65TL5UC Repair Instructions

5.13

Water switch

The water switch is best accessed from the bottom of the
dishwasher by flipping it on it's back.
access the heat pump and the sump.
6
2
1
Tools needed: T20 Torx, #2 Phillips & small flat blade
screwdrivers and pliers.
1. Flip dishwasher for bottom access – section 5.1.6.1.
702_58300000170749_ara_en_c
Use the same process to
3
4
5
1. Sump
2. Drain pump
3. Heat pump
4. Clamp
5. Adapter
6. Seal ring
7. Water switch
7
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
2. To remove water switch motor assembly, remove three (3)
screws and lift it from the sump (below).
3. To gain access to remove water switch housing / disk,
remove heat pump – section 5.12.
4. Use a small flat blade screwdriver to unlatch water switch
housing from sump, rotate housing counter-clockwise and
lift it out from the sump to remove it (below).
5. This is what the parts look like when removed.
Page 56 of 82