Cutlery Drawer (Selected Models) - Bosch SHP65TL5UC Repair Instructions

3. Unscrew salt reservoir cap (below).
wrench 341805, unscrew softener nut counterclockwise
(ccw) (below). Carefully drop the softener down and
away from the dishwasher.
If special wrench 341805 isn't available, unscrew the nut
by hand. An adjustable wrench can be used to loosen the
nut if special care is taken to not damage the plastic nut or
the ss tank.
CAUTION: Tank edges (at the softener outlet) are sharp!
Use gloves, cover tank edges and remove softener
carefully.
702_58300000170749_ara_en_c
Using special
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
5.20

Cutlery drawer (selected models)

5.20.1 Removing and disassembling cutlery drawer
Tools needed: None
1. Open door and pull out cutlery drawer.
2. When drawer is fully extended, lift up drawer until front
wheels clear rack slides and slide drawer off of rack slides.
3. To remove drawer from support, turn rack upside-down
and lift support from drawer, taking care to not break
plastic latches.
Page 62 of 82