Bosch SHP65TL5UC Repair Instructions page 63

4. To remove wheels, snap wheel assemblies off of the
drawer support, taking care to not break plastic latches.
5.20.2 Installing cutlery drawer
Tools needed: None
1. Open door and fully extend both rack slides.
2. Lift front of drawer, carefully slide wheels over slide front
endcaps until wheels clear them and lower front of
drawer until wheels fully engage rack slides (below).
702_58300000170749_ara_en_c This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
5.20.3 Removing rack slides (rails)
Tools needed: None
1. Remove cutlery drawer – section 5.23.1.
2. Slide rack slides in toward dishwasher until round
cutouts line up with tank wheels.
3. Rotate bottom of rack slides in toward dishwasher (away
from tank walls) and lift rack slides away from tank wheels.
5.20.4 Assembling rack slides (rails)
Tools needed: None
1. Rotate bottom of rack slides in toward dishwasher (away
from tank walls) and hook tops of rack slides over tank
wheels. Line up round cutouts of rack slides with tank
wheels and rotate bottoms of rack slides down.
Page 63 of 82