Table of Contents
Advertisement
Procedure to remove the roll media (feed side)
1
Pressure roller up / down lever
2
3
4
64
Loading the media
Raise the pressure roller up / down lever.
Rewind the flange to roll back the media.
Loosen the screw of the media holder to the
right, and while moving this media holder
slightly to the right, remove the roll media
from the media holder.
Note
‹ When removing the roll media from the media holder, be
careful no to let it fall as it may lead to personal injuries.
Pull the roll media out of the left media
holder and remove the roll media.
Advertisement
Table of Contents
